Zaffiri Precision Glock 19 9mm RMR cut ported olive drab green slide new
Zaffiri Precision Glock 19 9mm Ported Slide, RMR Cut, Olive Drab Green
So you want a weight-reduced, optic-ready G19 slide in OD Green that actually runs. This slide delivers that. A Zaffiri Precision Glock 19 Gen 3 ported slide with RMR cut, Olive Drab Green Cerakote. Single billet 17-4 stainless steel. 100% American made. Includes black anodized cover plate and mounting screws.
Zaffiri Precision Glock 19 9mm RMR cut ported olive drab green slide new This is a stripped slide — not a complete assembly. First, no internals, sights, or barrel are included. Next, the ported slide accepts ZP ported barrels and Glock OEM 19c barrels, not standard non-ported barrels. Finally, the RMR optic cut puts the red dot directly in line with your sights, with the rear dovetail retained behind the cut for backup iron sights.
Will this Zaffiri Precision Glock 19 9mm RMR cut ported olive drab green slide new fit my Glock 19?
Yes, for Gen 3 specifically. So this slide is designed and machined for Glock 19 Gen 3 frames. Also, it is compatible with aftermarket frames like the SCT 19, Polymer80 PFC9, and PSA Dagger. However, it will not fit Gen 4 or Gen 5 Glock 19 frames — Zaffiri produces separate slide models for those generations. Therefore, confirm your exact generation before ordering.
What barrel is compatible with this ported slide?
Zaffiri Precision Glock 19 9mm RMR cut ported olive drab green slide new Only Zaffiri Precision ported barrels or Glock OEM 19c barrels. So this slide is only compatible with ZP ported barrels for the G19 Gen 1-4 and Glock OEM 19c barrels. Also, a standard non-ported barrel will not properly clear the ported openings and will cause function and safety issues. Therefore, do not install a standard barrel in this ported slide — source a ZP ported barrel or OEM 19c barrel specifically.
What optics fit the RMR cut?
Zaffiri Precision Glock 19 9mm RMR cut ported olive drab green slide new Trijicon RMR, SRO, and Holosun 407c/507c footprint optics. So the optic mounting position is in front of the factory location of the rear sight, with the dovetail remaining behind the optic cut. Also, the slide ships with the correct mounting screws — Zaffiri specifically states you must use their provided screws, with blue Loctite recommended for proper retention. Therefore, don’t swap in random hardware for the optic mount.
What’s included with this stripped slide?
The Zaffiri Precision Glock 19 9mm RMR cut ported olive drab green slide newbody, black anodized cover plate, and mounting screws. So no barrel, internals, firing pin, extractor, or sights come with this slide. Also, installation services are available separately from Zaffiri if you need the slide assembled. Therefore, budget for a complete set of G19 Gen 3 internals and your choice of ported barrel when planning this build.
Who is this Zaffiri Precision Glock 19 9mm RMR cut ported olive drab green slide new best for?
This Zaffiri Precision Glock 19 9mm RMR cut ported olive drab green slide new fits G19 owners building a custom optic-ready setup who want the visual profile of a ported slide in OD Green. So if you’re running a ZP ported barrel and want the matched ported slide to complete the setup, this is the right part. Also good for custom builds on Polymer80 or PSA Dagger frames where you want a distinctive OD Green color scheme.
Specs Table
| Spec | Detail |
|---|---|
| Compatibility | Glock 19 Gen 3 frames; SCT 19, Polymer80 PFC9, PSA Dagger aftermarket frames |
| NOT Compatible With | Gen 4 or Gen 5 G19 frames |
| Caliber | 9mm |
| Material | Single billet 17-4 stainless steel |
| Finish | Olive Drab Green Cerakote (Cerakote Certified Coating Facility) |
| Optic Cut | RMR (Trijicon RMR/SRO, Holosun 407c/507c, RMR footprint) |
| Optic Mount Position | In front of factory rear sight location; rear dovetail retained |
| Barrel Compatibility | ZP ported barrels (G19 Gen 1-4) and Glock OEM 19c ONLY — standard non-ported barrels NOT compatible |
| Configuration | Stripped slide (no internals, sights, or barrel included) |
| Includes | Slide body, black anodized cover plate, mounting screws |
| Manufacturing | 100% American made, Largo, FL |
| Best For | Custom optic-ready G19 builds, Polymer80 builds, OD Green color builds |
| Weight | verify |
| Price | $220 |
FAQ
Will this Zaffiri Precision Glock 19 9mm RMR cut ported olive drab green slide new fit a Gen 4 or Gen 5 Glock 19? No. This is specifically for Gen 3 frames. Zaffiri Precision makes separate slides for Gen 4 and Gen 5.
Can I use a standard non-ported barrel with this slide? No. This ported slide is only compatible with ZP ported barrels (G19 Gen 1-4) and Glock OEM 19c barrels. A standard barrel will not work safely.
What comes with this slide? The slide body, black anodized cover plate, and mounting screws. No barrel, internals, or sights are included.
What optics fit this RMR cut? Trijicon RMR, SRO, Holosun 407c and 507c, and other popular RMR footprint optics.
Is this slide endorsed by Glock? No. Zaffiri Precision is not affiliated with, authorized, endorsed, or warranted by Glock, Inc. or Glock Ges.m.b.H.
Does this slide fit Polymer80 frames? Yes. It is confirmed compatible with the Polymer80 PFC9 and similar aftermarket Gen 3 pattern frames.
What screws should I use to mount my optic? Use only the screws provided by Zaffiri Precision. Blue Loctite is recommended. Do not exceed optic manufacturer torque specifications.
Find more Zaffiri Precision slides and Glock 19 build parts at gunpartspalace.com.
