Midwest Industries Shotgun Stock Remington 870 Polymer Cheek Piece Ambid..
Midwest Industries Shotgun Stock, Remington 870, Polymer Cheek Piece, Ambidextrous
So your factory 870 stock doesn’t line up with your optic or red dot. This stock fixes that. The Midwest Industries Lever Stock, built for the Remington 870. Adjustable polymer cheek piece. Ambidextrous design. 6061 aluminum grip and beam construction.
This is a real ergonomic upgrade, not just a different-looking stock. First, the polymer cheek piece adjusts to match your sighting setup, whether you’re running irons, a red dot, or a magnified optic. Next, the grip and stock beam are hard coat anodized 6061 aluminum, built for genuine durability. Finally, the ambidextrous design means left and right-handed shooters both get a stock that actually fits them.
Will this Midwest Industries Shotgun Stock Remington 870 Polymer Cheek Piece Ambid.. fit my Remington 870?
Yes, this stock is built specifically for the Remington 870 platform. So the receiver adapter is marked for the 870. Therefore, installation follows a defined process matched to that specific receiver shape. However, Midwest Industries also makes variants for Mossberg 500/590 shotguns, which use a different adapter, so confirm you’re ordering the correct receiver-specific version.
How does the adjustable cheek piece actually work?
It raises and lowers to match your sight height. So in its lowest position, the cheek piece sits at the same height as your factory stock, keeping a familiar baseline. Also, raising it improves your cheek weld when running a taller optic, like a red dot or magnified scope. Therefore, you get one stock that adapts to multiple sighting setups, instead of being locked into whatever height suited the factory configuration.
Is the length of pull adjustable on this stock?
Midwest Industries Shotgun Stock Remington 870 Polymer Cheek Piece Ambid.. It maintains factory length of pull as the baseline. So out of the box, this stock matches your 870’s original length of pull dimension. However, spacer plates are available as an add-on if you need a longer length for your build. Therefore, most shooters get a comfortable factory-matched fit immediately, with room to customize further if needed.
What’s actually included for grip and texture?
MI-designed grip panels with real-world texture in mind. So these panels are built specifically to maintain grip even in wet or snowy conditions, not just for looks. Also, the grip module includes M-LOK compatible slots on both sides, letting you add MI Universal Shell Holders or simple M-LOK panels depending on your priorities. Therefore, you can configure the stock around your specific use case, whether that’s extra ammo on hand or a cleaner aesthetic.
Can I install this stock myself?
Midwest Industries Shotgun Stock Remington 870 Polymer Cheek Piece Ambid.. Yes, with basic tools and some patience. So installation starts with removing your factory stock, including screws hidden beneath the recoil pad. Next, you’ll remove an internal stock bolt, which can be a slotted screw on the 870. Finally, you’ll mount the new receiver adapter, grip module, and cheek riser, torquing screws to spec and applying thread locker where recommended. A specialized bit for hidden recoil pad screws makes this much easier.
Specs Table
| Spec | Detail |
|---|---|
| Compatibility | Remington 870 (receiver-specific adapter; separate version exists for Mossberg 500/590) |
| Caliber | 12 Gauge (870 platform) |
| Material | 6061 Aluminum Alloy (grip/stock beam, hard coat anodized) + Polymer (cheek piece, grip panels) |
| Hand Orientation | Ambidextrous |
| Weight | 1.68 lbs |
| Cheek Piece | Adjustable; lowest position matches factory stock height |
| Length of Pull | Maintains factory length; spacer plates available separately for longer LOP |
| Sling Mounting | Multiple anti-rotation QD swivel sockets, plus one standard sling swivel stud |
| Accessory Mounting | M-LOK compatible slots, both sides |
| Recoil Management | Exclusive Midwest Industries butt pad |
| Best For | Defensive shotgun builds, optic-equipped 870s, range and home defense use |
| Price | $300 |
| Round Count Tested | verify |
FAQ
Will this stock fit a Mossberg 500 or 590 instead of my 870? Not directly. Midwest Industries makes a separate version with a different receiver adapter for Mossberg 500/590 shotguns. Order the correct version for your specific receiver.
Does this stock maintain my factory length of pull? Yes, by default. Spacer plates are available separately if you want to extend the length of pull beyond factory dimensions.
Is the cheek piece adjustable for different optics? Yes. It raises and lowers, with the lowest position matching your factory stock height and higher positions improving cheek weld with taller optics.
What’s the stock actually made from? The grip and stock beam are 6061 aluminum, hard coat anodized. The cheek piece and grip panels are polymer.
Can left-handed shooters use this stock comfortably? Yes. The design is ambidextrous, and the cheek riser specifically is reversible for left- or right-side use.
Do I need special tools to install this stock? A few helpful ones. A Magne-Tip bit makes removing hidden recoil pad screws much easier, and a torque wrench helps properly seat grip panel screws.
Can I add a shell holder to this stock? Yes. The M-LOK compatible slots support an optional MI Universal Shell Holder, letting you carry extra rounds directly on the stock.
Find more Midwest Industries shotgun stocks and Remington 870 upgrade parts at gunpartspalace.com.
