Chinese akm BOLT 7.62×39 ak-47 w/ firing pin extractor ak47
Chinese AKM Bolt, 7.62×39, AK-47, w/ Firing Pin & Extractor
So your AK’s bolt is worn, damaged, or just plain missing. This bolt fixes that. A genuine Chinese AKM bolt, chambered for 7.62x39mm. Complete with firing pin and extractor installed. Built for AK-47/AKM pattern rifles.
This is a complete, functional bolt assembly, not a bare bolt body needing extra parts sourced separately. First, it includes the firing pin already fitted. Next, the extractor and related small parts come installed as well. Finally, Chinese-manufactured AK bolts are notable in AK history for an early design feature most other countries didn’t use.
Will this Chinese akm BOLT 7.62×39 ak-47 w/ firing pin extractor ak47 fit my AK-47 or AKM?
Likely yes, but Chinese akm BOLT 7.62×39 ak-47 w/ firing pin extractor ak47 is required regardless. So this bolt is built to standard AKM dimensions for 7.62x39mm rifles. However, AK bolts are not universally drop-in across every receiver, even within the same caliber. Therefore, any aftermarket or surplus bolt, including this one, should be properly fitted and headspaced by a qualified gunsmith before live fire.
Why does headspacing matter for a replacement bolt?
Safety and reliable function. So even bolts built to correct nominal dimensions can vary slightly due to manufacturing tolerances. Also, improper headspace can cause function issues or unsafe firing conditions. Therefore, never skip this step. Have a competent gunsmith or armorer check headspace before relying on this bolt in a working rifle.
What’s special about Chinese AK bolts compared to other countries?
Spring-loaded firing pin design. So Chinese akm BOLT 7.62×39 ak-47 w/ firing pin extractor ak47 commercial AK bolts were among the first to use a spring-loaded, rebounding firing pin, a feature most other AK-producing countries didn’t adopt. Also, this design was developed specifically to reduce slam-fire risk with softer commercial primers. Therefore, this bolt reflects a deliberate, documented design choice in AK manufacturing history, not just a generic feature.
Does this bolt work with both semi-auto and full-auto AKs?
This depends entirely on your specific receiver and fire control group, not the bolt itself. So theChinese akm BOLT 7.62×39 ak-47 w/ firing pin extractor ak47 job is cycling and extraction, not controlling fire mode. Therefore, fire control function is determined by your trigger group and receiver, not by which bolt you install. Confirm your build’s legal configuration and compliance separately from bolt installation.
Who is this bolt best for?
This fits AK owners replacing a worn, damaged, or missing bolt, or builders finishing a parts-kit rifle. So if you need a complete, functional bolt assembly rather than sourcing firing pin and extractor separately, this saves a step. Also good for collectors specifically wanting genuine Chinese-manufactured components for an accurate build.
Specs Table
| Spec | Detail |
|---|---|
| Compatibility | AK-47/AKM pattern rifles, 7.62x39mm (headspacing required before use) |
| Caliber | 7.62x39mm |
| Includes | Bolt body, firing pin, extractor, related small parts |
| Origin | Chinese manufacture |
| Firing Pin Type | Spring-loaded/rebounding design (notable early Chinese AK feature) |
| Fitting Required | Yes; must be headspaced and inspected by a qualified gunsmith before use |
| Best For | Repairs, parts-kit builds, replacement of worn/damaged bolts |
| Length | verify |
| Weight | verify |
| Material | Steel |
| Price | $105 |
| Round Count Tested | verify |
FAQ
Will this bolt be a true drop-in fit for my AK? Not guaranteed. AK bolts often need fitting and Chinese akm BOLT 7.62×39 ak-47 w/ firing pin extractor ak47, even when built to standard dimensions. Always have a gunsmith verify fit before firing.
Does this bolt come with the firing pin and extractor already installed? Yes. This bolt ships complete, with the firing pin and extractor installed, not sold separately.
Why do Chinese AK bolts use a spring-loaded firing pin? This was an early design choice on Chinese commercial AK bolts, intended to reduce slam-fire risk with softer commercial primers.
Can I install this bolt myself? Basic installation is possible for experienced builders, but proper headspacing should always be checked by a qualified gunsmith or armorer before firing.
Will this bolt work on a 5.45×39 AK-74? No. This bolt is built for 7.62x39mm AKM-pattern rifles, not the 5.45×39 AK-74 platform, which uses different bolt dimensions.
What’s the difference between this and a bolt repair kit? A repair kit typically includes individual small parts, like the firing pin and extractor, for an existing bolt. This is a complete bolt assembly with those parts already installed.
Is this bolt new, surplus, or refurbished? Verify condition with the specific listing, since Chinese AK bolts in this category can vary between new production and surplus stock.
Find more AK47/AKM bolts and bolt repair parts at gunpartspalace.com.
