L1A1 FN FAL L4 BREN Magazine 30rd Steel 7.62X5 Inch Set of 2

L1A1 FN FAL L4 BREN Magazine 30rd Steel 7.62X5 Inch Set of 2

L1A1 FN FAL L4 BREN Magazine, 30rd Steel, 7.62×51, Set of 2

So you want real surplus magazines that actually match your L1A1 or FAL, not a guess-fit substitute. This set delivers that. Two original British-pattern 30 round steel magazines, built for the L1A1 (Inch pattern) FAL rifle and the L4 Bren light machine gun. Chambered for 7.62x51mm.

This is genuine shared military hardware, not a coincidence of similar-looking parts. First, these magazines were originally produced for the L4 light machine gun, itself a 7.62mm NATO conversion of the WWII-era Bren gun. Next, the British intentionally designed the L4’s magazine to interchange with the L1A1 rifle’s magazine well. Finally, that shared compatibility means one magazine pattern serves two genuinely different weapon platforms from the same era.

Will these magazines fit my L1A1?

Yes, directly, with no modification needed. So these L1A1 FN FAL L4 BREN Magazine 30rd Steel 7.62X5 Inch Set of 2 fit the L1A1, the Inch-pattern Commonwealth FAL variant, straight out of the box. Therefore, if you’re running a genuine L1A1 or Commonwealth-pattern SLR, these magazines drop right in without any fitting work required.

Will these L1A1 FN FAL L4 BREN Magazine 30rd Steel 7.62X5 Inch Set of 2 fit a Metric pattern FAL?

Only with a modification to the front catch. So these are Inch-pattern magazines, built with a brazed-on lug to engage the L1A1 FN FAL L4 BREN Magazine 30rd Steel 7.62X5 Inch Set of 2’s receiver recess. Therefore, fitting one into a Metric FAL requires modifying that front engagement lug. Confirm you’re prepared for that modification work, or that you’re specifically running an Inch-pattern rifle, before assuming a drop-in fit.

Why do these magazines also work in the L4 Bren?

Shared design lineage, by deliberate British engineering. So when Britain converted the Bren to 7.62mm NATO as the L4, they intentionally designed its new straighter magazine to interchange with the L1A1 FN FAL L4 BREN Magazine 30rd Steel 7.62X5 Inch Set of 2 rifle’s 20-round magazine. Also, this 30-round version extends that same compatibility logic, originally issued to L4 Bren gunners as their standard magazine. Therefore, this shared compatibility isn’t an aftermarket workaround, it’s original historical design intent.

What condition should I expect from surplus magazines like these?

Real military service wear, not new condition. So these are genuine British-issue surplus L1A1 FN FAL L4 BREN Magazine 30rd Steel 7.62X5 Inch Set of 2, meaning they’ve seen actual service use. Also, expect some finish wear, possible light marring, or small spots of surface rust consistent with age and storage. Therefore, inspect your specific magazines closely upon arrival, and expect honest used-surplus character rather than pristine, unissued condition.

Are there any shipping restrictions I should know about?

Yes, in some states. So this type of L1A1 FN FAL L4 BREN Magazine 30rd Steel 7.62X5 Inch Set of 2 has shipping restrictions in certain states depending on local capacity laws. Therefore, always confirm your state and local regulations before ordering, since high-capacity magazine laws vary significantly across the country.

Specs Table

FAQ

Will these magazines fit a Metric pattern FAL without any work? No. These Inch-pattern magazines need a modification to the front engagement lug to fit a Metric FAL. They fit the L1A1 directly without changes.

Why do L4 Bren and L1A1 magazines fit together? Britain deliberately engineered the L4’s 7.62mm conversion magazine to interchange with the L1A1 rifle’s magazine well, extending that compatibility to this 30-round version as well.

What condition are these surplus magazines in? They’ve seen genuine military service, so expect some finish wear, possible light marring, or small surface rust spots. Always check the specific condition grade listed.

Can I use commercial .308 Winchester ammo with these magazines? Magazine function isn’t ammunition-specific in that sense, but always confirm your specific rifle’s recommended ammunition and follow manufacturer guidance for safe operation.

Is this magazine pattern still restricted in any states? Yes, capacity restrictions vary by state. Confirm your local and state laws before ordering, since some areas restrict magazines at this capacity.

Were these magazines made for the rifle or the machine gun first? They were originally produced for the L4 Bren light machine gun, then adopted into broader use due to their built-in compatibility with the L1A1 FN FAL L4 BREN Magazine 30rd Steel 7.62X5 Inch Set of 2 rifle.

How many magazines come in this listing? Two magazines are included in this set.

Find more L1A1, FAL, and L4 Bren magazines at gunpartspalace.com.