SMR Short Action OBERNDORF Aluminum BDL Bottom Met
SMR Short Action Oberndorf Aluminum BDL Bottom Metal
So you want to shave weight off your hunting rifle without losing reliable feeding. This bottom metal gets you there. Snowy Mountain Rifle Company’s Oberndorf design, machined from a single billet of aluminum. Built for Remington 700 short action and clone actions.
This is not a stamped steel floorplate. Also, this is not a generic universal bottom metal. First, it’s CNC machined from one solid piece of 6061 aluminum, not stamped or cast. Next, it uses a snap-fit lid closure system designed to stay shut under recoil. Finally, it’s built specifically with lightweight hunting rifles in mind, not just bulk weight reduction for its own sake.
Will this SMR Short Action OBERNDORF Aluminum BDL Bottom Met fit my Remington 700?
Yes, on short action Remington 700 and 700 clone actions. So this bottom metal is designed around that specific action footprint. However, the Oberndorf profile differs from a standard Remington BDL profile. Therefore, it will fit inside a BDL-inlet stock, but may not seat perfectly without some fitting work. For a true factory fit, order a stock cut specifically for the Oberndorf inlet.
How much weight does this bottom metal actually save?
SMR Short Action OBERNDORF Aluminum BDL Bottom Met About 2.7 ounces total for the short action version. So compared to a standard factory BDL floorplate and trigger guard assembly, that’s a real, measurable weight cut. Also, that savings adds up on a build where every ounce matters, like a mountain hunting rifle. Therefore, this is a smart upgrade if you’re chasing total rifle weight reduction without giving up structural reliability.
Will this hold larger diameter magnum cartridges?
Yes, generally. So this bottom metal is cut to allow three rounds of larger diameter calibers, including 6.5 PRC, 7 SAUM, 300 WSM, 28 Nosler, 300 PRC, and 300 Norma. Also, it’s designed to fit standard box length or Wyatt’s extended magazine boxes. Therefore, it handles a wide range of modern magnum cartridges without feeding issues, assuming your action and stock are set up correctly.
Does the closure system hold up under recoil?
SMR Short Action OBERNDORF Aluminum BDL Bottom Met Yes. So the snap-fit lid closure is specifically designed to stay closed under recoil, even with hard-hitting magnum loads. Also, this matters more than people expect, since a floorplate that pops open under recoil can dump your rounds mid-hunt. Therefore, this closure design directly addresses one of the most common complaints with lighter aftermarket bottom metal options.
Who is this bottom metal best for?
SMR Short Action OBERNDORF Aluminum BDL Bottom Met This fits hunters building a lightweight Rifle for backcountry or mountain hunts. So if you’re trimming ounces everywhere on your build, this bottom metal contributes real, measurable savings. Also good for anyone running larger magnum calibers who wants reliable three-round capacity without bulk steel components.
Specs Table
| Spec | Detail |
|---|---|
| Compatibility | Remington 700 Short Action and clone actions |
| Material | 6061 Aluminum, single billet, CNC machined |
| Weight | Approx. 2.7 oz (short action) |
| Closure System | Snap-fit lid, designed to stay closed under recoil |
| Magazine Box Fit | Standard box length or Wyatt’s extended boxes |
| Caliber Capacity | 3 rounds for larger diameter magnums (6.5 PRC, 7 SAUM, 300 WSM, 28 Nosler, 300 PRC, 300 Norma) |
| Stock Fit Note | Fits BDL-inlet stocks with possible minor fitting; best fit requires Oberndorf-specific inlet |
| Manufacturing | 100% USA made, Montana facility |
| Best For | Lightweight hunting rifle builds, mountain/backcountry hunting |
| Length | verify |
| Price | $220 |
| Round Count Tested | verify |
FAQ
Will this bottom metal fit a standard BDL stock? Yes, generally, but the Oberndorf profile differs slightly from standard BDL. Some fitting may be needed for a perfect seat.
How much weight does this save over a factory floorplate? The short action version weighs approximately 2.7 ounces, offering real weight savings over heavier factory steel components.
Will this hold magnum cartridges like 300 PRC or 28 Nosler? Yes. This bottom metal is cut to allow three rounds of larger diameter magnum calibers, including those specific cartridges.
Does the floorplate stay closed under heavy recoil? Yes. The snap-fit lid closure system is specifically designed to remain closed, even under recoil from hard-hitting loads.
Is this made in the USA? Yes. Snowy Mountain Rifle Company manufactures these bottom metals in-house at their Montana facility.
Do I need a gunsmith to install this? Fitting can require gunsmith attention, especially if your stock isn’t cut specifically for the Oberndorf inlet profile.
What’s the difference between this and an M5 bottom metal? This BDL-style version uses a standard inlet. M5 versions are designed for a larger M5-specific inlet, allowing different stock and chassis compatibility.
Find more bottom metal options and Remington 700 build parts at gunpartspalace.com.
