TriggerTech Rem 700 Clone Bottom Safety Single Stage Diamond 0.3-2.0 lbs

TriggerTech Rem 700 Clone Bottom Safety Single Stage Diamond 0.3-2.0 lbs

TriggerTech Rem 700 Clone Bottom Safety Single Stage Diamond, 0.3–2.0 lbs

So you want the best single-stage trigger available for your Remington 700 clone action. This is it. The TriggerTech Diamond, bottom safety configuration, 0.3 to 2.0 pound adjustable pull range. Zero Creep Technology. Built specifically for cloned 700 actions.

This is TriggerTech’s top-tier offering, not a budget entry. First, five critical internal components are assembled as a matched set, not interchangeable, to achieve a true zero-creep break. Next, the 440C stainless steel internals don’t rely on polishing, coating, or lubricating contact surfaces to reduce creep. Instead, a patented rolling sear design physically eliminates creep at the mechanical level. Finally, the pull weight range is massive, from 0.3 pounds all the way to 2.0 pounds, fully adjustable without swapping springs.

Will this TriggerTech Rem 700 Clone Bottom Safety Single Stage Diamond 0.3-2.0 lbs fit my action?

This trigger is specifically for Remington 700 clone actions, not genuine Remington 700 production rifles. So if you’re running a custom action built on the 700 footprint, like a Defiance, Terminus, Kelbly, or similar clone-pattern action, this trigger is built for you. However, TriggerTech sells a separate version for genuine Remington 700 factory rifles. Therefore, confirm whether your specific action is a clone or factory Remington before ordering, since they’re different products.

What does “Zero Creep Technology” actually mean?

It means the trigger physically cannot creep, not just that it’s been polished to feel like it doesn’t. So TriggerTech’s rolling sear design interposes a roller between the sear surfaces, eliminating the sliding contact that causes creep in standard triggers. Also, because the system doesn’t depend on surface coatings or lubrication, performance stays consistent after thousands of shots. Therefore, the first shot feels the same as the ten-thousandth shot.

How low can I actually set this TriggerTech Rem 700 Clone Bottom Safety Single Stage Diamond 0.3-2.0 lbs safely?

Very low — but with a real caveat worth knowing upfront. So TriggerTech lists the adjustment range down to 0.3 pounds. However, independent testing by Snipers Hide confirmed, and TriggerTech acknowledged, that at minimum pull weight settings this trigger can discharge when the rifle is dropped butt-first from very low heights. At minimum weight, discharge was induced from as little as 4 inches of drop height onto the butt. Therefore, if you plan to run this trigger at or near minimum pull weights, use extra care with safe handling and storage, and consider running a slightly heavier setting for any field use.

Does this TriggerTech Rem 700 Clone Bottom Safety Single Stage Diamond 0.3-2.0 lbs work with my factory bottom safety?

Yes. So this version includes bottom safety functionality built in. Also, the safety can be removed entirely if your specific clone action doesn’t use a bottom safety, giving you configuration flexibility. Therefore, this is a genuinely versatile trigger that adapts to different clone action setups.

Who is this TriggerTech Rem 700 Clone Bottom Safety Single Stage Diamond 0.3-2.0 lbs best for?

This fits precision rifle competitors, long range shooters, and benchrest-oriented builders who want the crispest, most consistent break available on a 700-clone action. So if you’re running a match-grade custom action and want your trigger to match that level, the TriggerTech Rem 700 Clone Bottom Safety Single Stage Diamond 0.3-2.0 lbs is TriggerTech’s answer. Also good for PRS competitors specifically, since this trigger was developed in direct partnership with leading clone action manufacturers and competitive shooting teams.

Specs Table

FAQ

Will this trigger fit a genuine Remington 700? No. This version is specifically for 700 clone actions. TriggerTech sells a separate trigger for genuine factory Remington 700 rifles.

What’s the lowest safe pull weight for this trigger? TriggerTech lists 0.3 lbs as the minimum. However, independent testing confirmed drop-fire risk at minimum settings from as little as 4 inches of butt-down drop. TriggerTech acknowledged this finding. Run heavier settings for any field use.

How do I adjust the pull weight? Via an adjustment screw on the trigger housing, without needing to swap springs or send the Trigger back to TriggerTech.

Does this trigger include a bolt release? No. Clone action triggers from TriggerTech do not include a bolt release, as clone actions handle bolt release differently than factory Remington receivers.

What makes this better than the TriggerTech Special or Primary? The Diamond uses five matched-set critical components for a truer zero-creep break, and offers a lower minimum pull weight than the Special (which starts at 1.0 lb). It’s TriggerTech’s highest-tier single-stage offering.

Is the bottom safety removable? Yes. The safety can be removed if your specific clone action doesn’t require a bottom safety.

What actions is this confirmed compatible with? TriggerTech developed the Diamond in partnership with leading clone action manufacturers. Confirm with your specific action builder if you’re unsure, since fit can vary across different clone action designs.

Find more TriggerTech triggers and Remington 700 clone action parts at gunpartspalace.com.