FN SCAR 16S Non-Reciprocating Charging Handle (NRCH) Conversion Kit
FN SCAR 16S Non-Reciprocating Charging Handle (NRCH) Conversion Kit
So your FN SCAR 16S Non-Reciprocating Charging Handle (NRCH) Conversion Kit charging handle slaps your support hand every time you fire. This kit fixes that. The genuine FN America NRCH Conversion Kit, built specifically for the FN SCAR 16S. Dual, ambidextrous, non-reciprocating charging handles. Black finish.
This is a real FN factory upgrade, not a third-party workaround. First, the original SCAR design used a reciprocating charging handle because that was a SOCOM requirement at the time of development. Next, FN later engineered this NRCH system specifically to address that handling characteristic. Finally, this kit brings your existing SCAR 16S up to that same modern configuration.
Will this FN SCAR 16S Non-Reciprocating Charging Handle (NRCH) Conversion Kit fit my SCAR?
FN SCAR 16S Non-Reciprocating Charging Handle (NRCH) Conversion Kit Yes, if you run the SCAR 16S specifically. So this kit is designed only for the SCAR Light platform, chambered in .223 Rem/5.56 NATO. However, it is not interchangeable with the SCAR 17S or 20S, which use a separate NRCH kit built for the SCAR Heavy platform. Therefore, confirm your exact model before ordering, since Light and Heavy kits are not cross-compatible.
What’s actually included in this kit?
A complete charging handle system overhaul. So you get a new NRCH bolt carrier, a charging handle sled, and two ambidextrous, reversible charging handles. Also, the kit includes a new front plate with latch pin and screws needed for the conversion. Therefore, everything required for the swap ships in one kit, not piecemeal parts you’d need to source separately.
Why does a non-reciprocating handle matter?
Comfort and control, especially with support-hand placement. So a reciprocating handle moves back and forth with every shot, which can interfere with certain grip styles or forward hand positions. Also, this NRCH system locks forward on bolt-close and stays static during fire. Therefore, you get more consistent control regardless of grip style, shooting position, or optic setup.
Do I get a choice of charging handle styles?
Yes, two styles, swappable in the field. So one handle uses a 30 degree cant, specifically designed to reduce interference with low-mounted optics. Also, the other is a low-profile, straight design. Therefore, you can switch between them depending on your optic height and personal preference, without needing additional tools or parts.
Does this kit affect felt recoil or reliability?
Slightly, in a good way. So the new NRCH bolt carrier uses reduced reciprocating mass compared to the original design. Also, that reduction in moving mass can translate to less felt recoil during firing. Therefore, in addition to ergonomic gains, this kit may also make an already soft-shooting platform even smoother to manage.
Specs Table
| Spec | Detail |
|---|---|
| Compatibility | FN SCAR 16S (.223 Rem/5.56 NATO) ONLY; not compatible with SCAR 17S/20S |
| Caliber | .223 Rem / 5.56 NATO |
| Includes | NRCH bolt carrier, charging handle sled, front plate with latch pin and screws, 2 ambidextrous charging handles |
| Charging Handle Styles | 30° canted (optic clearance) and low-profile straight, field-swappable |
| Handle Function | Ambidextrous, reversible, lock forward on bolt-close, static during fire |
| Finish | Black |
| Manufacturer | FN America, genuine factory part |
| Best For | SCAR 16S owners upgrading ergonomics, optic compatibility, and control |
| Length | verify |
| Weight | verify |
| Material | verify |
| Price | $550 |
| Other Notes | Reduced reciprocating mass on new bolt carrier may also reduce felt recoil |
FAQ
Will this kit fit my SCAR 17S? No. This kit is built specifically for the SCAR 16S/Light platform. The SCAR 17S/20S Heavy platform requires a separate NRCH kit.
What’s included in this conversion kit? A new NRCH bolt carrier, charging handle sled, front plate with latch pin and screws, and two ambidextrous charging handles.
Why did the original SCAR have a reciprocating charging handle? It was a SOCOM design requirement when FN originally developed the platform, not an oversight or limitation.
Can I switch between the two included charging handle styles? Yes. Both the 30 degree canted and low-profile straight handles are reversible and field-swappable without extra tools.
Does this kit work with optics mounted low on the rail? Yes. The 30 degree canted handle option is specifically designed to reduce interference with low-mounted optics.
Is this a genuine FN America part? Yes. This is a genuine factory FN America NRCH conversion kit, not an aftermarket or third-party reproduction.
Will installing this kit affect my SCAR’s reliability? No. The kit maintains the platform’s reliability while improving ergonomics, and the new carrier’s reduced mass may slightly reduce felt recoil.
Find more genuine FN SCAR parts and upgrade kits at gunpartspalace.com.
